Support

At Dartware, we take pride in developing the best network monitoring software on the market.

But it's not only about making great software it's about how good we are at solving problems. We strive to answer customer's questions quickly and to incorporate suggestions for product changes and improvements into the product planning process.

"Let me start by saying that I love this program, and your tech support has been wonderful."

Nick Alex, IT Manager, Henkel Adhesives

"You know what? You guys rock! I don't think I've ever worked with a software package where the developers are so concerned with their product that they take the time to answer customers questions one on one, and to take suggestions for feature upgrades seriously."

John Stadter LAN/WAN Specialist Moorhead Area Public Schools

Network Management Software - InterMapper Customer Support

Cisco Monitoring Probes

Cisco Monitoring probes developed by the InterMapper User Community include:

IP SLA FTP Operation Probe [.zip]
Extracts FTP test data from a Cisco IP SLA configuration that is running on a Cisco router or switch.

IP SLA HTTP operation [.zip] [ view ]
Extracts HTTP test data from a Cisco IP SLA configuration that is running on a Cisco router or switch.

Cisco Stack Probe [.zip] [ view ]
Monitors the CPU and Memory utilization of a Cisco 3750 stack. It also displays the status of stack members. The probe provides On Demand tables

Cisco 6500 IOS Probe [.zip] [ view ]
Monitors the CPU utilization and power supply status of Cisco 4000/4500/5000/5500/6000/6500 Catalyst switches. It displays type and status of modules present in slots 1 to 9. The probe provides On Demand tables

Cisco 6500 Probe [.zip] [ view ]
Monitors the Utilization and power supply status of a Cisco 4000/4500/5000/5500/6000/6500 Catalyst switches (Hybrid CatOS/IOS). It displays type and status of modules present in slots 1 to 9. The probe provides On Demand tables

Cisco Catalyst Switch [.zip] [ view ]
Monitors the CPU and Memory utilization of a Cisco Catalyst switch. It displays basic Chassis/Software information. The probe provides On Demand tables

Cisco Service Control Engine [.zip] [ view ]
Monitors the performance of a Cisco SCE 2020 packet shaper. It can send alerts based on the number of active subscribers, the CPU utilization of any of the three Traffic Processors, and the Flows utilization of any of the three Traffic Processors.

Cisco Service Assurance Agent (SAA) Probe [.zip]
Monitors latency, jitter, or packet loss measured by a Cisco router with SAA installed, and produces alarms and warnings when they exceed user-specified thresholds.

Cisco Content Services [.zip] [ view ]
Provides Informational, Tables, Resource Usage, and Hardware Health information for Cisco Content Services Switches.

Cisco Adaptive Security Appliance [.zip] [ view ]
Provides Informational, Tables, Resource Usage, and Hardware Health information for Cisco Adaptive Security Appliance.

Cisco Catalyst Switches [.zip] [ view ]
Provide Informational, Tables, Resource Usage, and Hardware Health information for different series of Cisco Catalyst switches.

Cisco Integrated Services Routers [.zip] [ view ]
Provide Informational, Tables, Resource Usage, and Hardware Health information for different series of Cisco Integrated Services Routers.

Cisco PIX Firewall [.zip] [ view ]
Provides Informational, Tables, Resource Usage, and Hardware Health information for Cisco 5xx series PIX Firewall.

Cisco Routers [.zip] [ view ]
Provide Informational, Tables, Resource Usage, and Hardware Health information for Cisco 72xx and 76xx series routers.

Cisco Supervisor Engine [.zip] [ view ]
Provide Informational, Tables, Resource Usage, and Hardware Health information for Cisco Supervisor Engine.

Cisco 4400 LWAPP Controller Probe [.zip]
Displays CPU utilization, total RAM, free RAM, the first three WLANs, and tables for Connected APs and Rougue APs.

MGE EPC 6000 Series UPS Probe [.zip]
Provides basic monitoring of an MGE EPC 6000 UPS with a UM-Link Ethernet interface, including phases B and C.

Cisco FWSM Probe [.zip]
Monitors CPU and memory utilization, the number of connections, and performs interface polling.

Cisco ASA 5500 Probe [.zip]
Monitors the CPU and Memory utilization and number of total, IPSec and IKE connections of a Cisco ASA 5500 Adaptive Security Appliance.

Cisco Content Switch Module [.zip]
Monitors the connection parameters of a Cisco CSM.

Cisco Application Control Engine [.zip]
Monitors the CPU, memory and global connection parameters of a Cisco ACE module.

Cisco CallManager [.zip]
Monitors Cisco CallManager registered and unregistered phones.

Cisco ASA/PIX Firewall [.zip]
Monitors the CPU, Memory utilization, and number of connections of a Cisco Adaptive Security Appliance or PIX Firewall.

Cisco CSS Load Balancer [.zip]
Monitors the CPU, memory utilization, and number of connections of a Cisco CSS server load balancer.

Cisco VPN 3000 Concentrator [.zip]
Monitors average CPU utilization and number of active sessions on Cisco VPN 3000 series concentrators.

Cisco CPU/Memory/Temperature [.zip]
This enhancement to InterMapper's built-in SNMP-Cisco probe monitors the router's temperature, and allows you to set the device into alarm if the temperature exceeds your settings.

Cisco CSU [.zip]
Displays Errored Seconds, Severely Errored Seconds and Unavailable Seconds from the Transmission MIB of a Cisco CSU. The probe shows stats for both the current 15 minute interval and the last 24 hours on the first T1 CSU. Alarm thresholds can be set for current interval Errored Seconds and Severely Errored Seconds.

Environment Monitoring Probes

Environment monitoring probes developed by the InterMapper User Community include:

Netbotz 320 Probe [.zip]
Monitors the temperature, humidity, and airflow of a Netbotz 320 device. It will also alert when the camera motion sensor goes off.

APC Environmental Monitoring System Probe [.zip]
Monitors temperature and humidity for the APC AP9230 Environmental Monitoring System and alarms when thresholds are exceeded.

WeatherGoose Environmental Probe [.zip]
Monitors the very clever Weather Goose environmental monitoring device. The WxGoos-1 has built-in sensors for temperature, humidity, airflow, sound, light, and three I/O terminals and has a web, SNMP, XML, PDA, and WAP interfaces. This probe is for the WxGoos-1 internal sensors only. This probe graphs all the sensors and has low- and high-alarm and warning for temp. The WeatherGoose is made by I.T. Watchdogs, Inc.

EDS Environmental Monitor [.zip]
Monitors a few or a hundred HA7Net temperature sensors: see the HA7Net page for more details.

Ravica BitSight [.zip]
Monitors temperature, humidity, air flow and contact closures reported by te Ravica BitSight environmental monitor.

APC Environmental Monitor [.zip]
Monitors the temperature and relative humidity of an APC Environmental Monitor. This probe can monitor the values of up to two APC probes.

Environmental Monitoring Probe for MGE UM-Sensor [.zip]
Monitors an MGE "UM-Sensor" environmental sensor with a UM-Link Ethernet interface via SNMP. The probe can be used as a starting point for the design of similar probes, but this implementation assumes a single UM-Sensor (up to 4 could be daisy-chained) on the assigned comm port of the UM-Link interface (i.e. it only looks at the first entry in table that indexes sensor units).

Environmental Monitoring Probe [.zip]
Monitors the conditions (temperature and relative humidity) from an APC environmental monitoring card.

SNMP-Link Temperature Probe [.zip]
Monitors the temperature measured by the SNMP-Link SL60 & SL61 sensor units, manufactured by Omnitronix of Seattle, WA. These boxes also have RS-232 ports, switch closure inputs and relay outputs, all of which can be read by SNMP.

Miscellaneous InterMapper Probes

These InterMapper probes defy classification:

Promise E610F RAID Probe [.zip]
Monitors Promise E610F RAID device internal sensors: temperature, power supply, power supply fans, speed, blower speed, and cache battery status as well as some other basic drive information.

29West TCP Source Probe [.zip]
Facilitates the monitoring of TCP sources. A table of all TCP sources can be viewed, as well as aggregate statistics for all TCP sources on the monitored node.

29West TCP Receiver Probe [.zip]
Facilitates the monitoring of TCP receivers. A table of all TCP receivers can be viewed, as well as aggregate statistics for all TCP receivers on the monitored node.

29West LBT-RU Source Probe [.zip]
Facilitates the monitoring of LBT-RU sources. A table of all LBT-RU sources can be viewed, as well as aggregate statistics for all LBT-RU sources on the monitored node.

29West LBT-RU Receiver Probe [.zip]
Facilitates the monitoring of LBT-RU receivers. A table of all LBT-RU receivers can be viewed, as well as aggregate statistics for all LBT-RU receivers on the monitored node.

29West LBT-RM Source Probe [.zip]
Facilitates the monitoring of LBT-RM sources. A table of all LBT-RM sources can be viewed, as well as aggregate statistics for all LBT-RM sources on the monitored node.

29West LBT-RM Receiver Probe [.zip]
Facilitates the monitoring of LBT-RM receivers. A table of all LBT-RM receivers can be viewed, as well as aggregate statistics for all LBT-RM receivers on the monitored node.

Check SNMPTT Probe [.zip]
This command-line probe uses SNMPTT (SNMP Trap Translator) to translate SNMP traps into human-readable messages. It requires a shell script on the host that tails snmptt.log and extracts the error level and message, delimited by a pipe. This probe then remotely executes that shell script via a local shell script.

Enhanced Table Viewer Probe [.zip] [ view #1 ]
Displays a number of tables for an SNMP router or switch, including the ifTable, ifXTable, tcpConnTable, udpTable, ipAddrTable, ipRouteTable, ipForwardTable, ipCidrRouteTable, ipNetToMediaTable ("ARP table"), and a switch's forwarding table from the Bridge-MIB. The zip archive contains the probe file as well as five MIBs (RFC-1213, IP-MIB, IF-MIB, IP-FORWARD-MIB, and Bridge-MIB) that must be imported.

Riverbed Steelhead Probe [.zip]
Monitors the CPU, temperature, optimization service status, and connection counts for Riverbed Steelhead appliances
5. Printer Monitoring probes page

Printer Monitoring Probes

Printer monitoring probes developed by the InterMapper User Community include:

HP DesignJet Probe [.zip]
Monitors ink levels, media status, and some printer status on HP Designjet 1000, 2000, and 3000 series plotters using the SNMP to PML translator on the printer.

Printer MIB [.zip]
Monitors the state of the input and output trays, toner/ink levels, and any alerts generated by the printer.

Epson 900N Printer [.zip]
Monitors the ink levels in an Epson 900N printer. May work for other network-attached inkjets with two cartridges.

Server Monitoring Probes

Server monitoring probes developed by the InterMapper User Community include:

IBM xSeries [.zip]
Monitors IBM hardware by querying the Remote Supervisor Adapter (RSA-II) card installed in the server. (Note:You must configure SNMP and network settings on the RSA for your environment, and import the included rtrsaag.mib file into InterMapper in order to use this probe.)

IBM Bladecenter [.zip]
Monitors IBM hardware by querying the Bladecenter Management Module installed in Bladecenter. (Note: You must configure SNMP and network settings on the Bladecenter MM for your environment, and import the included mmblade.mib into InterMapper in order to use this probe.)

Red Hat Cluster Suite [.zip] [ view ]
Monitors the Red Hat Cluster Suite node/service/quorum status. (Note: You must follow the setup instructions in /usr/share/doc/cluster-snmp-/README.snmpd and import the included redhat-cluster-mib into InterMapper in order to use this probe.)

BlueCat Networks Adonis Server Probe [.zip] [ view ]
Monitors the current running status of the CommandServer, High Availability, DHCP, and DNS services, as well as polling for several DND server statistics.

HP Proliant Server Probe [ .zip ] [ view #1 ] [ view #2 ]
Monitors the hardware status for CPU, memory, power supplies, ILM log, fans, temperature and local storage. Changes in hardware status will trigger probe status changes and notifications. It also provides informative tables showing the file system, HP agent software, firmware revisions and what's in the PCI slots.

Dell PowerEdge Server Probe [.zip]
Polls the overall System Status values for the Global System, Chassis, Power, Cooling, Voltage, Temperature and Storage subsystems. This probe works with any Dell server with OpenManage 4.0 and above installed.

Compaq Host/RFC 1514 [.zip]
Monitors CPU Load for two CPUs, as well as Disk utilization, Allocation Failures and Memory Errors.

Novell GroupWise Message Transfer Agent [.zip]
Monitors rates of routed and undeliverable messages (in messages per minute) on a Novell GroupWise server.

Novell GroupWise Post Office Agent [.zip]
Monitors number of users connected, as well as messages and timeouts per minute, and client requests per second.

Novell Netware Volume [.zip]
Monitors free space on a specified Netware volume.

IBM AIX High Availability Cluster Resource Group [.zip]
Monitors the resource group for the number of resources and nodes.

IBM AIX HACMP Cluster State [.zip]
Displays Cluster name, state, substate, number of nodes, and status of an IBM High Availability Cluster.

IBM AIX HACMP Resources [.zip]
Displays the resource name and type of an IBM AIX HACMP high-availability cluster.

MeetingMaker 7.1 [.zip]
Tests a MeetingMaker server. It connects to the server and receives the list of calendars that are open. If the desired calendar isn't available, the device is marked as down.

SNAPServer - Single Disk [.zip]
Monitors the disk space (and overall server health) of a single disk (eg. 1000 series) Quantum SNAP Server.

SNAPServer - Mirrored Disk [.zip]
Monitors the disk space (and overall server health) of a dual disk (eg. 2000 series) Quantum SNAP Server configured to run as a single mirrored volume.

More Articles...

<< Start < Prev 1 2 3 Next > End >>

Page 1 of 3